- ページ 14

ペットケア製品 Dogtra 2200NCP SeriesのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Dogtra 2200NCP Series 18 ページ。 Remote controlled dog training collars
Dogtra 2200NCP Series にも：設定マニュアル (6 ページ)

ページを印刷する

1. Description of Transmitter Parts

OPERATING

OPERATING INSTRUCTIONS

Fitting the Collar

The collar strap should be adjusted so that

the contact points are held firmly against the

dog's skin. If the collar is too loose, irritation

may result from the contact points rubbing

against the skin.

If the dog has a heavy coat, move the

receiver up and down to work the contact points

down into the coat.

ATTENTION!

Avoid having the dog wear the collar with

the contact points in the same place for more

than two hours at a time. Leaving the points

on the same spot for extended periods of time

can cause skin irritation. If the dog is to wear

the e-collar for long periods, occasionally

reposition the collar so that the contact points

are moved to a different spot on the dog's

neck.

Intensity Selection

To select the intensity level, start on the zero

(0) setting. Gradually increase the level until you

get a response from the dog that would be

equivalent to a quick pull or jerk with a leash.

Remember that you will need to adjust the

setting (upward or downward) as the dog's

attitude changes, especially during times of

increased excitement or distraction.

Prolonged use of the Pager (12 seconds or

longer) will drain the batteries more quickly.

OPERATING