- ページ 13

ペットケア製品 Dogtra 3500XのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Dogtra 3500X 19 ページ。 Expandable to 2-dog system
Dogtra 3500X にも：コード設定マニュアル (2 ページ)

10. Attaching the Belt Clip

Follow the instructions below to attach the included belt

clip to the transmitter.

1. Align the belt clip to the grooves on the back of the

transmitter.

2. With a firm grip, screw on the belt clip's Phillips head

screws with a screwdriver.

Caution!

Tighten until firmly in place. Be careful not to over

tighten.

1. To turn on the receiver/collar, press the on/off button

for a moment until the LED light on the receiver/collar

comes on and the receiver/collar will emit a melody.

The indicator light will come on for a moment then

blink once every 5 seconds, showing that the collar is

ready to use (the receiver needs to be charged if the

indicator light is red).

2. Turn the transmitter on by pressing the on/off button

on the right side of the transmitter until the OLED

screen illuminates. The LED will blink every 5 seconds

and the OLED screen will show the remaining battery

life (the transmitter needs to be charged if there is

only 1 bar showing on the battery icon for the OLED

transmitter screen).

3. Place the test light, included in the package contents,

on the contact points as shown in the diagram.