- ページ 10

ペットケア製品 Dogtra EdgeのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Dogtra Edge 19 ページ。 Remote controlled dog training collars
Dogtra Edge にも：オーナーズマニュアル (19 ページ), 製品マニュアル (14 ページ), オーナーズマニュアル (20 ページ), コード設定マニュアル (2 ページ)

* The transmitter and receiver/collar rubber-charging cap ensures dirt

and debris does not build up in the charging port area. The unit is

waterproof even if the rubber-charging cap is not fully closed.

To charge multiple receivers/collars and a transmitter, combine

additional battery charger splitter cables as shown.

* Warning

1. Fully charge the unit before the first use.

2. Do not charge the unit near any flammable substances.

3. Fully charge the unit before storing for one month or longer.

4. Always use Dogtra approved charging adapters. When the wrong

charging adapter is used, the LED indicator will not turn on or blink

amber.

8. How to change the stimulation intensity

The Dogtra EDGE has the ability to switch between the rheostat/volume

intensity and the selector/step intensity.

The EDGE unit comes installed with the rheostat dial knob in place. To

switch to the selector/step dial, follow the steps below.

1. Turn the stimulation level to 0.

2. Unscrew the top of the dial with a flathead screwdriver counter-

clockwise.

3. Remove the current dial knob and replace with the desired intensity

dial type.

4. While firmly holding the dial knob in place, tighten the screw

clockwise.

Next, change the program setting to the corresponding intensity dial

type.