- ページ 14

ペットケア製品 Dogtra Element 300M seriesのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Dogtra Element 300M series 20 ページ。 Remote control dog training collars
Dogtra Element 300M series にも：製品マニュアル (14 ページ), オーナーズマニュアル (20 ページ)

ページを印刷する

CHARGING THE BATTERIES

Metal-Hydride) batteries.

1. Charge the unit before using the unit for

the first time.

2. Do not charge the batteries near any

flammable substances.

3. Fully charge the batteries for 10 hours if the

unit is to be stored without use for a period

of 3 months or more.

Recharge the unit if :

The LED indicator light on the

collar/receiver is emitting a red color.

uses Ni-MH (Nickel-

CHARGING THE BATTERIES

The indicator light on the transmitter or

receiver will not ACTIVATE.

The transmitter or receiver does not stay on

when one of the stimulation or pager buttons

is pushed.

Battery Charging Procedure

1. Attach the charging cables to both the

transmitter and receiver(s), as shown on page

2. Plug the charger into a 120-volt wall outlet or,

if using the accessory field charger, plug into a

cigarette lighter. (Use a 230-volt European

charger for Europe.) When properly plugged

in, all indicator lights should glow red.

The receiver automatically turns off when you

insert the charging cable into the battery-

charging receptacle on the receiver.

3. After charging, cover the battery charging

receptacles with the rubber plugs on the

transmitter and receiver.

4. The battery is fully charged with a 10-hour

charge. The lights will stay red during the

charging process. They DO NOT turn green

when fully charged. Charging the batteries for

more than 10 hours at one time will not extend

the battery life.

24.