- ページ 2

呼吸器製品 3M 9210+のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。3M 9210+ 6 ページ。 Particulate respirator n95

This respirator helps protect against certain particles. Misuse may result in sickness or

death. For proper use, see supervisor, or User Instructions, or call 3M in U.S.A.,

1-800-247-3941. In Canada, call Technical Service at 1-800-267-4414.

IMPORTANT

Before use, wearer must read and understand these User Instructions. Keep User Instructions for reference.

Use For

Particles such as those from grinding, sanding, sweeping, sawing, bagging, or processing minerals, coal, iron

ore, flour, metal, wood, pollen, and certain other substances. Liquid or non-oil based particles from sprays

that do not also emit oil aerosols or vapors. Follow all applicable local regulations. In the U.S, for additional

information on 3M use recommendations for this class of respirator please consult the 3M Respirator

Selection Guide found on the 3M OH&ESD web site at www.3M.com/PPESafety or call 1-800-243-4630. In

Canada call 1-800-267-4414.

Do Not Use For

Do not use for gases and vapors, oil aerosols, asbestos, or sandblasting; particulate concentrations that exceed

either 10 times the occupational exposure limit or applicable government regulations, whichever is lower.

This respirator does not supply oxygen. In the U.S., do not use when OSHA substance specific standards,

such as those for, arsenic, cadmium, lead in the construction industry, or 4,4'-methylene dianiline (MDA),

specify other types of respiratory protection.

Biological Particles

This respirator can help reduce inhalation exposures to certain airborne biological particles (e.g. viruses,

mold, Bacillus anthracis, Mycobacterium tuberculosis, etc.) but cannot eliminate the risk of contracting

infection, illness or disease. OSHA and other government agencies have not established safe exposure limits

for these contaminants.

1. Failure to follow all instructions and limitations on the use of this respirator and/or failure to wear this

respirator during all times of exposure can reduce respirator effectiveness and may result in sickness or

death.

2. Before occupational use of this respirator, in the U.S. a written respiratory protection program must be

implemented meeting all the requirements of OSHA 29 CFR 1910.134 such as training, fit testing,

medical evaluation, and applicable OSHA substance specific standards. In Canada, CSA standard Z94.4

requirements must be met and/or requirements of the applicable jurisdiction, as appropriate.

3. The particles which can be dangerous to your health include those so small that you cannot see them.

4. Leave the contaminated area immediately and contact supervisor if dizziness, irritation, or other distress

occurs.

5. Store the respirator away from contaminated areas when not in use.

6. Inspect respirator before each use to ensure that it is in good operating condition. Examine all the

respirator parts for signs of damage including the two headbands, staples, noseclip, and nosefoam. The

respirator should be disposed of immediately upon observation of damaged or missing parts. Filtering

facepieces are to be inspected prior to each use to assure there are no holes in the breathing zone other

than the punctures around staples and no damage has occurred. Enlarged holes resulting from ripped or

torn filter material around staple punctures are considered damage. Immediately replace respirator if

damaged. Staple perforations do not affect NIOSH approval.

0515 IS-17011