- ページ 7

アクセサリー Clockaudio CDT100のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Clockaudio CDT100 17 ページ。 Dante transporter
Clockaudio CDT100 にも： ユーザーマニュアル (16 ページ)

ページを印刷する
3 – Connections
The CDT 100 accepts unbalanced or balanced audio devices.
Refer to the following diagrams and instructions for connecting different types of audio devices.
Professional grade audio cabling is recommended to achieve the best audio performance throughout the system.

3.1 - Input from a Balanced Source

To connect balanced sources to the CDT 100:
 Connect positive output to positive input, negative output to negative input
 Connect the grounds together through the cable shield.
3.2 – Input from an Unbalanced Source
To connect a 2-wire unbalanced source to the CDT 100:
 Connect the positive output of the unbalanced source to the positive input of the CDT 100.
 Connect both the source and CDT 100 input grounds together
 Short the negative input of the CDT 100 to ground at the input of the CDT 100.
To connect a 3-wire unbalanced source to a CDT100:
 Short the negative conductor to the shield at the source connection.
©
Clockaudio 2015
Source
+
-
Shield
Figure 4
- Balanced Source Connection
Source
+
Shield
Figure 5
- 2-Wire Unbalanced Source Connection
Source
+
Shield
Figure 6
- 3-Wire Unbalanced Source Connection
7
CDT 100
unDIO2x2
Input
+
-
CDT 100
unDIO2x2
Input
+
-
CDT 100
unDIO2x2
Input
+
-
CDT100 User Manual