- ページ 4

医療機器 Aseptico ADU-17AのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Aseptico ADU-17A 12 ページ。 Express air portable dental system
Aseptico ADU-17A にも：取扱説明書 (16 ページ)

ページを印刷する

SETTING UP THE UNIT:

FIG. 1 - ADU-17A Express Air

HANDPIECE

HIGH VOLUME VACUUM

(HVE)

COOLANT ON/OFF

SWITCH

AIR CONTROL

VALVE

Unpack the ADU-17A Case.

Verify that the Voltage Selector Insert is configured properly

by checking the voltage indicator on the Voltage Selector

Module (Figure 2a). The Voltage Module is located on the

lower left of the Motor Cover. The Voltage Selector Insert

must be installed in the "120" position for 120V 60Hz

operation or in the "240" position for 230V 50Hz operation.

ALWAYS DISCONNECT POWER TO THE SYSTEM BEFORE

OPENING VOLTAGE SELECTOR MODULE

To switch the voltage configuration, disconnect power cord

and insert a small flat screwdriver under the locking tab in the

front of Selector Module. Gently depress tab until the fuse

housing releases (Figure 2b). Carefully remove fuse housing

to reveal Voltage Selector Insert (Figure 2c). Pull insert out of

housing, turn it around and reinsert into housing with proper

voltage indicator facing out (Figure 2d).

WASTE TANK TIE-

DOWN

CAVITRON

CONNECTOR

COOLANT

CONTROL VALVE

WARNING:

3-WAY AIR/WATER SYRINGE

CLIP-ON INSTRUMENT HOLDER

LOW VOLUME VACUUM (SALIVA

EJECTOR)

RESEVOIR CONNECTOR

WATER SUPPLY BOTTLE

COMPRESSOR AND FAN

HOUSING

ON/OFF SWITCH

VOLTAGE SELECTOR

MODULE

IMPORTANT: For 120V use, check that the Fuse in use

is a 6A medium time delay; for 230V use, check that

the Fuse is a 4A Slo-Blo type. User may have to change

fuses before use.

For 230V use, confirm that the power cord is correct for the

country of usage and carries the proper certifications.

Carefully reinstall fuses into Fuse Holder and slide Holder

back into Selector Module (Figure 1e). Apply pressure until

locking tab snaps back into position, producing a distinct

clicking sound.

Mount the clip-on Holder to the extended handle of the Case,

as shown in Figure 3.

CASE HANDLE

WASTE TANK

FOOT PEDAL

FUSES LOCATED IN

VOLTAGE SELECTOR

MODULE