- ページ 5

ペットケア製品 DogWatch R8のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。DogWatch R8 17 ページ。 Performance series transmitter and receivers

9. PowerPak™: Optional battery back-up system keeps the transmitter operating in the

event of a power failure. When transmitter is being powered by battery back-up, the

red power light will remain off. PowerPak plugs into the transmitter at "P-PAK".

10. Model Switch: This switch sets your transmitter to work with your specific receiver(s).

Your DogWatch Dealer will set the switch in the "up" position. The Transmitter must

be turned off when setting or changing this switch.

Performance Series R7 and R8 Receivers

The lightweight radio receiver worn by the dog identifies the coded FM radio signal

from the boundary wire. It creates an audible warning followed by stimulation if he

comes too close to the boundary wire. It operates on a replaceable battery and is

waterproof when the battery cap is securely fastened.

Battery Insertion Instructions

Important: You must reset the "Battery Reminder" Feature when you change the

battery. See "Battery Replacement Reminder on page 6.

R7 Battery: The Performance Series receiver is powered by a 3 volt 1/3 N lithium bat-

tery. The receiver is designed for a 6 month battery life. The positive (+) end of the

battery must be inserted up.

R8 Battery: The R8 battery is powered by a 3.6 volt lithium battery. The receiver is

designed for long battery life of up to two years. The positive (+) end of the battery

must be inserted down.

Figure 1

Insert R7 Battery Positive End UP.

Battery Plans: Ask your DogWatch Dealer about a battery plan. If your DogWatch

Dealer does not have a battery plan, you can join the DogWatch Battery Program,

where a new battery is mailed to you every 6 or 24 months. Call DogWatch at 800-793-

3436 or join through the DogWatch Web Site at www.dogwatch.com.

Important: When you remove the receiver collar from your dog at night, do not store

it near or on a television. Please note battery handling instructions marked on the bat-

tery and on the diagram above.

(Figure 1)

(Figure 2)

Insert R8 Battery Positive End DOWN.

Figure 2