- ページ 5

ペットケア製品 DogWatch System 1200のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。DogWatch System 1200 12 ページ。 System
DogWatch System 1200 にも：インストレーション・マニュアル (10 ページ), 取扱説明書 (16 ページ), 取扱説明書 (9 ページ)

ページを印刷する

SYSTEM 1200 FEATURES & SETTINGS

Hidden Fence Transmitter

The Transmitter's coded digital FM radio signal can be adjusted, allowing you to control

the settings of the Hidden Fence around your property.

Power

On/Off

Power Supply

Never adjust the transmitter while your dog is wearing the receiver collar.

1. Power On/Off: This switch gives you easy access to turn the Transmitter 'ON' or

'OFF'. The Power light on the front panel lets you know that it is operating properly.

2. Power Supply: The Transmitter is powered by the power supply/adapter provided

with the Transmitter. The power supply is plugged into a properly grounded 110

volt outlet and the adapter is plugged into the "PWR" jack on the bottom of the

Transmitter.

3. Ground Wire: The green ground wire connects to the Transmitter at the location

labeled "GND." The round connector on the green ground wire is attached under

the screw on the outlet faceplate. It will, however, only be effective if your outlet is

properly grounded. If you have any questions about having a properly grounded

outlet, consult your local electrician.

4. Boundary Loop Plug: Your system includes a zip cord with a plug on one end.

This plug fits into the hole marked "Loop" on the bottom of the Transmitter. This is

the beginning of the boundary wire that is buried in your yard.

5. Range Control: The radio signal is transmitted from the boundary wire in all

directions. The signal range (the distance the signal broadcasts from the wire) is

adjusted by the Range Control on the transmitter. The recommended signal range

(on each side of the wire) is 6-10 feet. Your DogWatch Dealer will adjust the range

according to the personality and traits of your dog. Consult your DogWatch Dealer

before making any adjustments yourself.

Ground Wire

Boundary Loop Plug

Range

Control