- ページ 2
医療機器 CYMEDICA Orthopedics QB1のPDF クイック・リファレンス・マニュアルをオンラインで閲覧またはダウンロードできます。CYMEDICA Orthopedics QB1 2 ページ。 Knee brace
CYMEDICA Orthopedics QB1 にも： ユーザーマニュアル (2 ページ), クイック・リファレンス・マニュアル (2 ページ), クイック・リファレンス・マニュアル (2 ページ), ユーザーマニュアル (10 ページ), ユーザーマニュアル (7 ページ)
ページを印刷する
INSTRUCTIONS FOR USE:
At-Home Muscle Strengthening Therapy
The CyMedica QB1™ system is designed to provide
advanced muscle stimulation therapy at home. The
QB1 strengthens the quadriceps muscles following
surgical procedures and may also be used to treat
non-surgical knee conditions such as osteoarthritis.
1
Fit the Conductive
STEP
Garment and Brace
Sit on the floor with the open conductive garment
under your a ected leg. Align the pre-positioned
electrodes with your targeted quadriceps muscles.
Remove the electrode covers.
ELECTRODE
PLACEMENT
Wrap the garment (with attached brace) around the
top of your thigh and loosely secure it. Follow the
same procedure with the calf panels below the knee.
Bend your knee and ensure that the brace hinges
are properly aligned. Adjust accordingly and
tighten the conductive garment straps into their
final position. Verify that the brace's bars are
located on the sides of your leg.
Align hinges
2
STEP
Secure the Brace
Attach strap connectors
and wrap around brace
Attach and wrap all strap connections on the outside
of the brace. Make sure all straps are tightly secured
to prevent slippage.
If indicated by your healthcare provider:
Fully extend your leg and engage slide locks on
either side of the brace to immobilize in full
- OR -
extension.
Set range-of-motion limits using
hinge dial on either side of the brace.
For more detailed instructions about securing the brace,
visit:
www.cymedicaortho.com/products/support/qb1/
Connect and
3
STEP
Start NMES
Attach the end of the controller cord to the
conductive garment socket.
Power on the controller using the ON/OFF switch
located on the top left side of the device. The
screen will display 2 options:
"POST OP" AND "STRENGTH"
Select the option directed by your healthcare
provider.
Adjust Stimulation Intensity
Use the controls to increase the
intensity of stimulation until a
strong but comfortable muscle
is achieved.
contraction
Stimulation levels may be
adjusted at any time during
your treatment session.
Select the "+" sign to deliver electrical stimulation
to your quadriceps muscles. You may feel light
tingling until you reach a comfortable muscle
contraction.
Set intensity levels for both the knee and thigh
areas. Note: It is common to require di erent
levels of stimulation for each area.
Select the "START" button to begin your
20-minute treatment session.
Press the rectangular button under the display screen
to PAUSE treatment if needed. Press the "RESUME"
button on the start screen to continue treatment.
The controller may be placed inside the provided
pouch and adhered to the side of the garment for
convenience during treatment sessions.
When your treatment session has ended, turn o
the controller and unplug it from the conductive
garment by pressing inward on both sides of the
connector.
4
STEP
Charge the Controller
To charge your device, turn o the controller and plug
the charging cable into the left side of your controller.
Insert into a wall adapter and electrical outlet.