- ページ 9

超音波ジュエリークリーナー Doheny's Economical Above Ground Suction CleanerのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Doheny's Economical Above Ground Suction Cleaner 9 ページ。

ページを印刷する

To Install a new diaphragm, simply reverse the process:

a. Fit the retaining ring onto the new diaphragm.

c. Pull the inner extension pipe up through the

body, positioning the tabs so they can be

pulled through the holes in the IEP locator.

e. Check that the diaphragm is correctly located.

If it has become twisted during installation,

simply untwist by slightly turning the open

end of the diaphragm.

g. Place the outer extension pipe over the inner

extension pipe.

10411 80th Avenue Pleasant Prairie, WI 53158 | Orders and Customer Care: 1-800-574-7665 | Fax: 1-800-323-5932 | Doheny.com

b. Push the diaphragm onto the inner extension

pipe. Make sure it is correctly located and

fully engaged.

d. Gently turn the inner extension pipe so the

tabs are aligned with the recesses in the IEP

locator. Release the inner extension pipe.

f. Slide the thrust washer over the inner exten-

sion pipe. The flat side (widest diameter) of

the thrust washer should face down.

h. Screw the handnut into place to lock the

assembly. Be careful not to over-tighten the

handnut. Check that the outer

extension pipe swivels freely.