ガレージドアオープナー Clopay EZ-SETのPDF 組み立て/設置手順をオンラインで閲覧またはダウンロードできます。Clopay EZ-SET 12 ページ。 Torsion spring system
ページを印刷する
EZ-SET
Assembly Installation Instructions
EZ-SET
Torsion Spring
®
System Assembly
Installation Instructions
These instructions are to be used in conjunction
with your standard installation manual. Follow
the manual up through "Assembling & Installing
the Track" — except leave a minimum of
side between track and door, and just loosely
(temporarily) attach
/
3
in flag bracket.
Please read and understand these instructions
completely before proceeding with the instal-
lation of the EZ-SET
Carefully follow these instructions to avoid
personal injury or property damage.
Use these instructions for the EZ-SET
Spring System only. (If you have regular
torsion springs, extension springs, or the
EZ-SET® Extension Spring System see the stan-
dard Installation Manual.)
All REfERENCES TO lEfT hANd ANd RIGhT hANd ARE mAdE ASSUmING
Torsion Spring System
®
1
"-16 x
/
" carriage bolt
3
8
4
Torsion Spring System.
®
Torsion
®
ThAT yOU ARE INSIdE ThE GARAGE lOOkING OUT.
Tools Needed
•
/
" Medium duty reversible power drill
3
8
•
/
" Open end wrench
3
8
•
/
" Hex wrench
3
16
•
/
" Drill bit
1
8
•
/
" Insert bit (included)
1
4
/
" per
2
In the interest of safety this symbol means
WARNING or CAUTION. Personal injury
and/or property damage may occur unless
instructions are followed carefully.