- ページ 10

書画カメラ Ash Prisma HDのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Ash Prisma HD 13 ページ。

Sound on/off

The sounds can be disabled by pressing Zoom Down while

powering on the unit. Repeat to enable the sounds again.

Press Mode while powering-on the Prisma HD to restore

factory settings for sound, lighting, brightness settings and

video frame rate.

Most HD televisions can display all the many different

standards of HD signals, however some cannot. If your

television does not display the image from the Prisma HD

you should try the following: power-off the Prisma, press

and hold the Overview button and power on the unit. This

will change the unit from 50 Hz mode to 60 Hz and vice

versa. You will hear a sequence of three beeps confirming

the frequency change.

Do not touch the lens. Dirt on the lens will appear as a

blurred or dim image or as fuzzy spots on the screen. If you

believe the lens is dirty, it can be cleaned with a soft, dry

cloth applying minimal pressure. As the lens is polished and

coated, do not use a wet or coarse cloth, avoid detergents

and abrasive substances or solvents to clean it.

WARNING: Never look directly at the LED light source for

any prolonged period of time.

Page 10

Prisma HD English Rev 1.00