- ページ 6

デジタル・プレゼンター Ash Technologies EclipseのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Ash Technologies Eclipse 15 ページ。

Symbol Name

Overview

Line marker &

Shutters

Semi-colours

Brightness

Mode

4. Basic Functions

This section will describe how to use the basic features of the Eclipse to

magnify text and images. Follow the instructions in section 1 – Setting

Up before you begin using the unit.

4A. Reading Table

Unlock the table and place the material you want to read on it. The

table should slide easily in all directions. After transport, the bearing

carriers in the table slides may have moved, tending to restrict the

extent of the movement – this is normal. To correct this, extend the

table in all directions to its full extent, applying sufficient force to re-align

the bearing carriers.

Basic function

Overview mode zooms out to allow you to

find your place on the reading material

and then returns to the previous zoom

level.

Places a guiding line on the screen or

dims off the top and bottom of the screen.

Allows the use of different ink and paper

colours.

Pressing this button on the right or left

increases and decreases the brightness

or contrast of the image.

The mode button switches between

picture mode (for viewing pictures and

images) and reading modes (high

contrast mode). A single press will switch

from picture mode to the last used

reading mode (positive or reversed) or

vice versa. A subsequent press within 2

seconds will switch to the other reading

mode.

Pressing and holding this button for 2

seconds will bring up the Configuration

Menu, described in Section 6 below.

Page 6

Rev E US EN