- ページ 8

マトリックススイッチャー CYP CMSDI-84のPDF 操作マニュアルをオンラインで閲覧またはダウンロードできます。CYP CMSDI-84 16 ページ。 16 by 4 / 12 by 4 / 8 by 4 / 4 by 4 3g-sdi matrix

6. OPERATION CONTROLS AND FUNCTIONS

16X4 3G SDI Matrix CMSDI-164

LCD Monitor: This LCD monitor displays the configuration of the

input and output selections. The upper line displays the outputs A, B,

C, & D. The lower line displays each output's selected input.

IR Receiver: Receives the IR signal from the remote control

included in the package.

OUTPUT Button: Press this button to select the output A~D the cursor

will skip to the lower line of the LCD monitor then, select an input

for highlighted output.

INPUT −/+ Button: Press − or + button to select the input sources

from 1~16, press ENTER to confirm the selection.

Note: Depending on different models, the selectable input will be

displayed on the LCD monitor.

Lock Button: Press both the '−' and 'ENTER' buttons together to lock

all the function keys on the panel. To unlock, press both buttons

again.

ENTER Button: Press this button to confirm the selection. Press both

the 'ENTER' key and '–' key together to lock all the keys on panel.

To unlock, press both the 'ENTER' key and '–' key together again to

release the locking system.

LOCK LED: This LED will illuminate in green when the key lock is

active.

POWER LED: This LED will illuminate green when the device is

switched ON. When in standby mode (Press the power key on the

remote control) the LED will turn red.

OUTPUT

INPUT

ENTER

LOCK

POWER

LOCK