- ページ 5

マトリックススイッチャー CYP CMSI-8H8CVのPDF 操作マニュアルをオンラインで閲覧またはダウンロードできます。CYP CMSI-8H8CV 20 ページ。 Hdbaset 4x4/8x8 hdmi matrix over cat5e/6/7
CYP CMSI-8H8CV にも：操作マニュアル (20 ページ)

ページを印刷する

4. SYSTEM REQUIREMENTS

• HDMI equipped source devices, connect with HDMI cables or DVI

equipped source, connect with DVI to HDMI cables

• HDMI equipped displays (TVs or monitors) or HDMI equipped AV

receivers, connect with HDMI cables

• Industry standard CAT5e/6/7 cables

• HDBaseT™ Receivers (i.e. CH-506RX, CH-507RX or CH-1109RX)

5. FEATURES

• HDMI, HDCP1.1 and DVI compliant

• Supports HDMI 3D features

• Supports resolutions VGA~WUXGA and 480i~1080p dependent upon

the output display's EDID settings

• Supports 3D signal display dependent upon the output display EDID

settings

• Supports PoE (Power over Ethernet) on compatible receivers only

• Supports HDMI input up to 15 meters at 8-bit resolution or 10 meters

at 12-bit resolution

• Supports bi-directional IR from input and output locations

• Supports RS-232, remote control, on-panel control and IP Control

(Telnet & Web GUI)

• 2U size design

• Supports external and internal EDID settings

• Supports LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus and DTS-HD

Master Audio transmission

Note:

1. The PoE function is designed for powering compatible receiver units

only—non-PoE receivers will need their own power supply. Receivers

of another brand may not be compatible.

2. Do not connect the LAN/CONTROL port to CAT outputs of this

device.

2 2