- ページ 12

コントローラー ASHAPOWER NEON-30のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。ASHAPOWER NEON-30 14 ページ。 Solar mppt charge controller
ASHAPOWER NEON-30 にも: ユーザーマニュアル (14 ページ)

ASHAPOWER NEON-30 ユーザーマニュアル
MENU
1.CAL-AMP (AMPS
CALIBRATION)
2.CAL-VOL (VOLT
CALIBRATION)
3.BVH-CUT
(BATTERY CHARGING
HIGH CUT OFF VOLT)
4.MAX-AMP
(CHARGING AMPS)
5.GRD-SOL (GRID TO
SOLAR CHANGE
OVER)
6.SOL-GRD (SOLAR TO
GRID CHANGE OVER)
7.BLK-LED (LOW
BATTERY WARNING)
Note: Values will be displayed as mul�ples of 10 (e.g. 14.5V will be displayed as 145)

MPPT SETTINGS

TYPE
When MPPT is charging the battery, note
the charging Amp reading in MPPT
display. Connect a true RMS DC clamp
meter (FLUKE brand) to the +ve wire of
calibration
the battery and note the reading in its
display.If there is difference in reading
increase / decrease the default value till
both readings are same
Note the Battery volt reading shown on
the display of MPPT.Connect a true RMS
DC Volt meter to the battery terminal and
calibration
note the reading. If there is difference in
reading increase / decrease the default
value till both readings are same
Limit the Max. battery charging high volt
cutoff. Default voltage given is for Lead
Acid battery(C10). For SMF batteries this
Settings
value is 13.7 onwards (Refer battery user
manual for settings)
Limit the charging current to the
connected battery bank if needed. (Max.
charging current is recommended as
20% of the Ah of a single 12V C10
Settings
Battery e.g. for a 150 Ah C10 Lead Acid
battery, 30A is the recommended
charging current - Refer battery user
manual)
If you have connected grid power to
your inverter through MPPT set the
battery terminal volt you prefer to shift
Settings
automatically from grid power to battery
power (Solar Power)
Set the battery voltage you prefer to shift
Settings
automatically from inverter to grid power
Blinking of blue LED indicates low
battery volt. Set this value above the
Settings
value set in the SOL-GRD change over
menu
DESCRIPTION
12
RANGE
MIN
MAX
DEFAULT
50
115
220
-
-
-
13V
14.5V
16V
3A
30A
30A
12V
14.2V
16V
9V
11.5V
16V
LB
11.8V
16V