ページを印刷する
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
UHD 4 TO 1 SWITCHER CPRO-U4H1HFS
1
1
IR Window: This IR Receiver receives the remote control signal from
the included remote control only with IR frequency at 38kHz.
2
POWER & LED: Press this button to turn ON the device or set the
device to standby mode. The LED will illuminate in green when
switch to ON. This device contains power last memory and therefore,
when the power is connected the device will switch to ON/Standby
according to the last status.
*IP Reset: Press this button simultaneously with the INPUT button for
3 seconds when the unit is powered on, when the LED blinks once it
means the IP Reset is complete.
3
SYNC: This LED will illuminate when both the input source and output
display are linked with an active signal.
4
IN 1~4: Press the INPUT button to select an input from the 4 input
sources, LED will illuminate according to the selection.
8
POWER
SYNC
2
3
INPUT
1
2
3
4
4