- ページ 7
計測機器 Ashcroft DG25のPDF 据付・取扱説明書をオンラインで閲覧またはダウンロードできます。Ashcroft DG25 16 ページ。 Digital pressure gauge
ページを印刷する
Tare Function:
Subtracts current pressure value from value
displayed in Measurement mode.
In Measurement mode, apply desired pressure
©
press
, to enable the tare function. The
ZERO
display will quickly flash "TARE", then the
"TARE" icon will be displayed and the pressure
reading will blink. The unit should now read 0.
©
Press
the TARE key ICON again to dis-
ZERO
able the function. The display will quickly flash
"T OFF", then the "TARE" icon will disappear
and the pressure reading will no longer be
blinking. The unit will now return to measure-
ment mode.
Programming:
To enter menu mode
©
1. Press
M ENU
to programming mode.
©
©
2. Press
,
grammable menu options.
3. When desired option is reached press
©
k
to access that parameter.
4. If at any time you choose to EXIT the
menu mode (or sub-menu mode) hold
©
. Your work will not be saved.
M ENU
Programmable Parameters:
Units of Measure:
1. In Menu mode, press
scroll to "UNITS", press
2. Choose engineering units by scrolling
©
©
,
, until desired unit is dis-
played, "PSI, BAR, kg/cm, kPa, mPa,
FtH
O, InHg, cmHG, mmHg, customer de-
2
fined units (CUSTU)".
©
k
3. Press
Measurement Mode.
Note: Custom units programming, see page 8.
7
and release to proceed
, to scroll through pro-
©
©
,
, to
©
k
.
to select units and return to