- ページ 3

送信機 Ashcroft ZT11-DQのPDF インストールとメンテナンスの説明書をオンラインで閲覧またはダウンロードできます。Ashcroft ZT11-DQ 8 ページ。 Non-sparking high purity transmitter

ページを印刷する

Installation and Maintenance Instructions for

ZX11 Non-Sparking High Purity Transmitter

OUTLINE DRAWINGS: ZT11 VCR Type Swivel, M12

SPAN ADJUST

POTENTIOMETER

0.53

[13.5]

3.26

2.10

1.54

[82.7]

[53.3]

[39]

0.24

[6]

0.63

[16]

OUTLINE DRAWINGS: ZT11 VCR Type Fixed, M12

SPAN ADJUST

POTENTIOMETER

0.53

[13.5]

1.86

[47.2]

3.74

[95]

1.35

[34.3]

5. PRECAUTIONS FOR USE

5.1 Transportation Precautions

All sales subject to standard terms and conditions of sale. ZX11_Transducer_im_RevA_(I&M011-10278)_06-05-20

ZERO ADJUST

POTENTIOMETER

M12X1

ELECTRICAL

CONNECTION

0.87 HEX

⁄

-18 UNF

ZERO ADJUST

POTENTIOMETER

M12X1

ELECTRICAL

CONNECTION

0.67 HEX

⁄

-18 UNF

This is a precision measuring instrument.

Do not drop or impact when transporting as

CAUTION:

shock may cause damage and render the

instrument inoperable.

5.2 Unpacking Precautions

Ø 1.00

[25]

•Check packaging appearance prior to unpacking.

0.18

[4.5]

• Carefully handle and do not drop unit carton.

• Open instrument's sealed bag in a clean

CAUTION:

Ø 0.79

[20]

• Upon unpacking, inspect unit to verify that

[22]

• Contact distributor or Ashcroft if any

5.3 Installation Precautions

(1) ZT11 pressure transmitter is equipped with a union

connection that is compatible with a VCR fitting. For

installation, make sure to use hexagonal flats to tighten

fitting. Do apply force to the unit enclosure when attached

to the pressure line.

(2) This product has protection class IP67 (connector mat-

ing state/JIS C 0920).

For longer-term operation, select a location that is not

exposed to direct sunlight, condensation, dust, oil or water. In

addition, please pay particular attention to the following during

Ø 1.00

[25]

installation.

0.18

[4.5]

• Do not drop or impact unit as shock may

• Do not install product in an environment

Ø 0.79

[20]

• Use product in ambient temperatures

• Allow for space around the instrument for

[17]

• Do not touch or breathe on the gas contact

• Do not apply excessive force to the

CAUTION:

WARNING:

• Take care not to block the air inlet on the

environment. Do not expose Pressure

Transmitter's gas contact parts to moisture,

dust, etc.

the model type and physical appearance are

correct and free from damage.

abnormality has been identified with the

product.

render

unit inoperable.

exposed to vibration, impact, direct sunlight

or dust.

between

-4° to 158°F (-20° to 70°C)

maintenance and adjustment.

parts, while taking care not to damage the

Indicates that incorrect use may result in

service injury or loss of life.seat surface.

enclosure during installation.