- ページ 9

送信機 CYP CH-2602TXWPUSのPDF 操作マニュアルをオンラインで閲覧またはダウンロードできます。CYP CH-2602TXWPUS 16 ページ。 Hdmi over hdbaset transmitter (pd) with optical audio return (oar)

OFF no ARC audio will be passed.

Note: When ARC is enabled the maximum supported HDMI cable

length may vary. It is suggested to use cables under 2 meters long

to ensure the best audio quality.

OPT. OUT: Connect to an audio receiver or powered speaker set to

reproduce the audio signal from the Receiver's OPT. IN port.

IR OUT 1: Connect to the provided IR Blaster to transmit IR signals to

devices within direct line-of-sight of the IR Blaster.

IR IN 2: Connect to the provided IR Extender to extend the IR

control range of remotely located devices. Ensure that the remote

being used is within direct line-of-sight of the IR Extender.

LAN: Connect to an Ethernet supporting device or to your local

network as appropriate. The yellow LED will illuminate to indicate a

successful LAN connection between the Transmitter and Receiver

and will blink to indicate a data transmission. The green LED will

illuminate when the connected Ethernet speed is 100Mbit/s.

RS-232 IN: Connect to a PC, laptop or other serial control device

for the extension of RS-232 signals to the Receiver.

HDMI IN: Connect to HDMI source equipment such as a media

player, game console or set-top box.