- ページ 8
送信機 CYP PUV-1510RXWPのPDF 操作マニュアルをオンラインで閲覧またはダウンロードできます。CYP PUV-1510RXWP 20 ページ。 Hdmi over cat5e/6/7 wallplate transmitter with 48v poh
ページを印刷する
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Transmitter Front Panel
1
POWER: This LED will illuminate when the device is connected to a
power supply.
2
LINK: This LED will illuminate solid when both Transmitter and
Receiver are connected and communicating with each other properly.
3
LAN: Connect to an Ethernet device or to your local network as
appropriate an internet or network system.
4
RS232 IN: Connect to a PC or laptop with D-Sub 9-pin male cable for
the transmission of RS-232 command.
5
HDMI IN: Connect to the HDMI source equipment such as a game
console or Blu-ray player.
6
IR IN 2: Connect to the supplied IR Extender cables for IR signal
reception. Ensure that remote being used is within the direct line-of-
sight of the IR Extender.
7
IR OUT 1: Connect to the supplied IR Blaster cable for IR signal
transmission. Place the IR Blaster in direct line-of-sight of the
equipment to be controlled.
8
UPDATE: This switch is reserved for factory use only.
8
2
1
POWER
LINK
UPDATE
IR
OUT 1
IN 2
8
7
6
LAN
3
RS232 IN
4
HDMI IN
PUV-1510TXWP
5