- ページ 8

送信機 CYP PUV-1710LRX-AVLCのPDF 操作マニュアルをオンラインで閲覧またはダウンロードできます。CYP PUV-1710LRX-AVLC 18 ページ。 70m hdbaset hdr transmitter & receiver

6. OPERATION CONTROLS AND FUNCTIONS

PUV-1710LTX-AVLC

STD/HQ: This switch allows user to select which compression mode

to use when AVLC is active. HQ (High Quality) mode uses the least

amount of compression and provides the highest possible visual

quality (perceptually identical to the original). STD (Standard Quality)

mode applies additional signal reduction methods to lower the band-

width requirements of 4K sources further, improving transmission

reliability over longer cable runs at the cost of some visual fidelity.

ISP: This button is reserved for factory use only.

STD/UPDATE: This switch is reserved for factory use only. The default

setting is "STD".

RS-232 IN: Connect to a PC, laptop or other serial control device for

the extension of RS-232 signals.

SYNC LED: This LED will illuminate when a live input source is detect-

ed.

HQ/STD LED: This LED will illuminate whenever the AVLC function is

active. A green LED indicates that AVLC is in HQ (High Quality) mode.

A red LED indicates that AVLC is in STD (Standard) mode.

POWER LED: This LED will illuminate to indicate the unit is on and

receiving power.

LINK LED: This LED will illuminate solidly when a live connection with

a compatible Receiver is active. The LED will blink with a regular pat-

tern if a Receiver is connected but there is not currently a live signal.

The LED will blink with an irregular pattern if a connection error has

occurred.

UPDATE

STD

1 2

HQ/STD