- ページ 8
エクステンダー CYP CH-506RXPLのPDF 操作マニュアルをオンラインで閲覧またはダウンロードできます。CYP CH-506RXPL 16 ページ。 Hdmi to cat5e/6 extender
CYP CH-506RXPL にも： 操作マニュアル (16 ページ)
ページを印刷する
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Transmitter Front and Rear Panels
DC 24V
Power
Link
Lite
1
2 3
1
DC 24V
Plug the 24V DC power supply into the unit and connect the adaptor to
an AC outlet.
2
Power LED
This LED will illuminate when the device is connected with power supply.
3
LINK LED
This LED will illuminate when the device is connected with a CAT5e/6
cable from the Receiver side. When the data transmission accrue with
error the LED will be blinking.
4
CAT5e/6/7 Out
Connect to the Receiver unit with a single CAT5e/6/7 cable for
transmission of all data signals.
5
RS232 In
Plug the 3.5Ø to D-Sub 9 pin female cable included in the package and
connect to a PC or laptop for RS-232 commands transmission.
6
IR2 Extender
Connect to the IR Extender cable for IR signal reception. Ensure that
remote being used is within the direct line-of-sight of the IR Extender.
7
IR1 Blaster
Plug the IR Blaster for IR signal sending from the Receiver side. Place
the IR Blaster in direct line-of-sight of the equipment to be controlled.
8
HDMI In
Connect with source equipment such as DVD/Blu-ray player or any HDMI
equipped source device for input signal sending.
3 3
CAT 5e /6 Out
4
IR2 Extender
RS232 In
IR1 Blaster
5
6
7
HDMI In
8