- ページ 5

録音機器 ASHE STL-94のPDF 操作マニュアルをオンラインで閲覧またはダウンロードできます。ASHE STL-94 17 ページ。 Stream selector

6. PAGE MODE

The PAGE MODE provides the operator with the last updated process values for all Streams on one

screen. The process values of all channels can be viewed by pressing the PAGE/INC key on the front

panel.

The LCD display will appear as follows: -

The instrument should first be mounted in an appropriate cut-out on the panel [See T

]. All interconnections to the instrument should be made with strong multi-strand wire of

PECIFICATIONS

the order 2.5 sq.mm. The ends of the wires should be properly ferruled and suitable lugs must be used

for effective termination.

The cables carrying the input signal from the Sensor should be routed separately and properly isolated

from the power line cables, to prevent any electromagnetic interference in the input signal readings

from the mains power line. The instrument should be earthed to a proper grounding point before

connecting the Power Supply. The voltage between the Earth and Neutral terminals should be

negligible (Approx. 1 V AC). The Relay contacts are potential free and may be powered as per

customer's requirements with the desired voltage.

Further, the instrument is manufactured using selected high-grade components which guarantee it's

functionality and long operational life. The instrument carries the specified performance warranty

against manufacturing defects and workmanship defects.

The front panel of the Stream Selector is as shown below:

1) 0100

2) 0200

3) 0300

4) 0400

OPERATION & SETTINGS

ASHE CONTROLS PRIVATE LIMITED.

STL-94

TREAM

ELECTOR

Operation Manual

ECHNICAL