ページを印刷する
6.2 Receiver Front and Rear Panels
DC 5V
CAT5e/6 IN
1
1
DC 5V
Plug the 5V DC power supply into the unit and connect the adaptor to
an AC outlet.
2
CAT5e/6/7 IN
Connect to the transmitter unit with a single CAT5e/6/7 cable for HDMI
Audio/Video and IR/RS-232 control signal transmission. The yellow LED
will illuminate when both the transmitter and receiver are connected and
are powered. The green LED will illuminate when the device is connected
to the power supply.
3
IR IN
Connect to the supplied IR receiver cable for IR signal reception.
Ensure that remote being used is within the direct line-of-sight of the
IR extender.
4
HDMI OUT
Connect to a HDMI equipped TV/monitor for display of the HDMI
input source signal.
5
RS 232 OUT
Connect the 3.5mm mini-jack to D-Sub 9-pin female adaptor cable
included in the package to a PC or control system with D-Sub 9-pin
cable for the transmission of RS-232 commands.
2
IR IN
HDMI OUT
RS232 OUT
3
4
5
9