- ページ 7

ケーブルとコネクター CYP CHDBT-1H1CEのPDF 操作マニュアルをオンラインで閲覧またはダウンロードできます。CYP CHDBT-1H1CE 17 ページ。 1x2 hdmi over hdmi and cat5e/6/7 splitter with ir/rs-232, lan serving and bidirectional poe

ページを印刷する

5. FEATURES

• HDMI with 4K×2K resolution and 3D support, HDCP and DVI

compliant

• Simultaneous HDMI and CAT5e/6/7 outputs

• Supports data rate from 250 Mbps up to 3 Gbps

• Supports a wide range of PC resolutions from VGA to WUXGA (RB) and

HDTV resolutions up to 4K×2K (3840 × 2160@30 Hz and 4096×2160@24 Hz)

• Supports transmission of High Definition audio: LPCM 7.1CH, Dolby

TrueHD, Dolby Digital Plus and DTS-HD Master Audio (32 kHz~192 kHz

sample rate)

• Supports distances up to 100 meters through CAT5e/6/7 cables

• Supports Ethernet network rates up to 100 Mbps

• Supports selection of Standard or TV EDID settings

• Supports USB service port

• Provides 24V DC power to or received from compatible PoE

Receiver through CAT5e/6/7 cable

• Supports control of devices via 2-way IR

• Supports RS-232 function

• 3D signal display is dependent on the TV/Display's EDID settings

Note:

This system was tested with CAT6/23AWG cables, results may vary

with cables of a different specification.

The PoE function is designed for powering compatible Receiver

units only, non-PoE Receivers will need their own power supply.

Receivers of another brand may not be compatible.

For playback of 4k × 2k HDMI source signals, a 4K × 2K capable

display and High Speed HDMI cables are required.