- ページ 10

ケーブルとコネクター CYP CLUX-1H8CATのPDF 操作マニュアルをオンラインで閲覧またはダウンロードできます。CYP CLUX-1H8CAT 16 ページ。 1 by 8 hdmi to cat 6 v1.3 splitter

2. When EDID switch to STD the unit will use built-in EDID which supports:

Video → 1080p 8-bit or 12-bit (max)

Audio → PCM 2CH

3. The EDID selection will only activate when the unit is re-plug and power on.

④ System Reset: Switch to " ON " , the system will send the internal CEC to the

display within 8~10 minutes to force all the displays to switch to HDMI 1 input

port. Meanwhile, the source ' s CEC will not functional to the system. When

switch to " OFF " , the system reset function will be terminate. Factory default is

on " OFF " .

⑤ HDMI input: This slot is for connecting the source equipment with HDMI

cables.

⑥ HDMI output: This slots is for connecting the display with HDMI Cable.

Note:

A. Cable tested with CAT-6E / 23AWG / Solid and therefore, cable with

different specification may result in different distance.

B. Cable distance tested with equipment PS3 40G, and 37" SamSung 12 bit

LCD TV.

C. Figures provided in this manual are reference figures only, actual

figures may depend on source and display use with cable specification.

⑦ Video/DDC 2~8: These slots allow you connect to the HDMI displays with

CAT6 to HDMI receiver. When more than one output are connected, the

HDMI outputs play identical video signal simultaneously.

⑧ Power: This slot is to plug the 5VDC power supply included in the package

into the unit and connect the adaptor to an AC wall outlet.