- ページ 7

ケーブルとコネクター CYP CPRO-U2TのPDF 操作マニュアルをオンラインで閲覧またはダウンロードできます。CYP CPRO-U2T 16 ページ。 4k uhd 1x2 hdmi splitter

CYP CPRO-U2T 操作マニュアル

5. FEATURES

• HDMI 2.0 and DVI 1.0 compliant
• HDCP 1.4 compliant
• 1 HDMI input and 2 HDMI outputs
• Supports HD resolutions up to 4096×2160@60Hz (4:2:0, 8-bit)
• Simultaneous display of a single 4K source on up to two 4K displays
• 3D signal support (with 3D source and compatible 3D TV)
• Supports pass-through of audio formats including LPCM 2.0/5.1/7.1,
Bitstream, and HD Bitstream
• System Reset function (CEC active source command)
• EDID management control including "Standard" (Internal EDID)
mode and "TV" (External Display EDID) modes

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Front Panel

POWER LED: This LED will illuminate to indicate the unit is on and
1
receiving power.
2
IN LED: This LED will illuminate to indicate that a live source has
been detected on the input port. When no source is detected the
LED will remain off.
3
OUT LEDs 1~2: These LEDs will illuminate to indicate when a valid
sink has been detected on the associated output port. When no
sink is detected the LED will remain off.
EDID SWITCH: This switch controls the EDID management behavior
4
of the unit. When set to "TV" mode the unit will read and store
the EDID from the sink connected to output 1 and pass it to the
connected source. When set to "STD" mode the unit will use a built
in EDID defined as 1080p@60Hz, 8-bit, LPCM 2.0.
POWER IN
OUT
1
2
1 2
3
EDID
SYS-RST
SERVICE
STD
TV
ON
OFF
4
5
6
2