- ページ 6

ケーブルとコネクター CYP qu-2-4k22のPDF 操作マニュアルをオンラインで閲覧またはダウンロードできます。CYP qu-2-4k22 12 ページ。 1 by 2 6g hdmi splitter

6. OPERATION CONTROLS AND FUNCTIONS

POWER: This LED will illuminate when the device is connected to an

active power supply.

6G/3G: When input source bandwidth is 6G, the 6G LED will

illuminate, when input source detect as 3G, the 3G LED will

illuminate.

IN SYNC: When input detected, the LED will illuminate, the LED will

ﬂ icker when detected abnormal, for example, when source signal

not stabled, and when input is not connected, the LED light will off.

IN HDCP: When Input HDCP has been detected, the LED will

illuminate, the LED will ﬂ icker when HDCP abnormal, for example

when HDCP version is not supported, and when no HDCP

detected, the LED will off.

OUT 1~2 SYNC: When output detected, the LED will illuminate,

the LED will ﬂ icker when detected abnormal, for example, when

output connected but the output sense is off, and when output is

not connected, the LED will off.

OUT1~2 HDCP: When output HDCP working, the LED will illuminate,

the LED light ﬂ icker when HDCP abnormal, for example, when

HDCP version is not supported, and when no HDCP detected, the

LED will off.

EDID: Switch the dip could choose EDID mode to Standard (STD)

mode or TV mode. When on TV mode, the unit will automatically

detect and store output 1 sink EDID data, if switch to STD mode

and reboot the unit, the unit will search the suitable resolution out

of all connected display and with standard 1080p and PCM 2

channel.

3 3

OUT 1 OUT 2

POWER

SYNC

HDCP

1 2 4

EDID

SYS-RST

STD

OFF