- ページ 4

リレー DOLD VARIMETER PROのPDF モニタリング技術をオンラインで閲覧またはダウンロードできます。DOLD VARIMETER PRO 8 ページ。 Multifunction measuring relay

ページを印刷する

Operating

Display (Run) -

mode

Ph-Seq

Rel2

Rel1

Esc 3s

Cos-Phi

Asym

RUN

Umax

Umin

Display (RUN) Mode

Display inverted when the actual value is in failure state.

Scroll display between the 10 different measuring values.

Reset fault memory:

For more the 3 sec, change to input mode

Esc

Operating - Display - Menü (RUN) Mode

relay 1 energized

Cursor-

display

relay 2 energized

relay 1 and 2 energized

Cursor flashes during time delay tv

actual

value

Umin

Umax

[V]

Input-mode

Start up delay

Response value for Rel2

variant MH

Response value for Rel1

Break

Esc (Break) 3s

(cancel changes)

OK-

(OK) 3s

(return with new settings)

M10931

actual

value

Asym

[%]

[A]

After connecting the auxiliary supply A1/A2 the unit is in display (Run)

mode:

The display is inverted when a measured value is exceeds the settings.

With button

the fault memory is reset.

The actual measured values can be toggled with the

Pressing button

for more than 3 sec the unit changes to input mode.

Esc

In input mode the measurement is disabled, the relays are in failure mode

and the indicator LED is orange.

With the buttons

the different setting values can be chosen.

Move cursor position

One character to the right

One character to the left

Esc

Back to the Display (Run)-Mode

Press button

3 s

Press button

3 s;

Esc

on the display confirm with

RUN

Input-Mode

Measurement interrupted, relays are in failure state,

indicator LED orange color

Chose Rel1, Rel2, T

As option address for RS485 Bus

Chose parameter

Change and set response values for Rel1 and Rel2.

Shift cursor to the left

Esc

Shift cursor to the right

For more than 3 sec, change to display mode

actual

value

Cos-

Phi

[W]

[VA]

New values stored

Break

Values unchanged

to change to display (Run) mode.

and RUN

actual

value

[var]

[Hz]

11.01.16 en / 627

buttons.

Ph-

feld

M11002