- ページ 2
室内装飾品 Ashley BBT 6695のPDF 組み立て説明書をオンラインで閲覧またはダウンロードできます。Ashley BBT 6695 2 ページ。 Twin headboard
ページを印刷する
MODEL : BBT 6695 TWIN HEADBOARD
Read instructions carefully. See furniture and hardware part
list on the right for guidance.
Have all parts ready before assembly. Place all wooden furniture
parts on a clean and flat soft surface to prevent scratching.
Before you start, here are some words of caution:
1. Do not FULLY - TIGHTEN nuts and bolts until all nuts and bolts are partially tightened.
2. Do not FULLY - TIGHTEN nuts and bolts to avoid causing damage to the threading.
3. Keep all hardware parts out of reach of children.
NOTE : THE LIST AND QUANTITY SHOWN ARE FOR 1 UNIT ASSEMBLY.
STEP 1
Note: Extra screws were provided
for attaching the headboard to your
bed frame (use is optional).
1. Line up the bed frame board's pre-drilled holes
to match those of the headboard.
2. Secure the headboard to the bed frame by
using 2x JCBB bolt 60mm (1) for the thicker bed
frame, and 2x JCBB bolt 35mm (2) for the thinner
bed frame. Before inserting each bolt, place a M6
spring washer (4) and M6 flat washer (3) on each
bolt. Then fit a M6 flat washer (3) on the screw as
it protrudes through the other side of the bed
frame.
3. Place a M6 Hex Nut (5) after the M6 flat washer
(3) at the end of each screw. Then tighten by using
the M4 Allen key (6).
4) Repeat the same procedure for each screw and
each side of the bed frame.
ASSEMBLY INSTRUCTIONS (BED FRAME)
ITEM
A
B
A
B
3
4
6
1
FURNITURE PART LIST
QTY
ITEM
DESCRIPTION
1
A
HEADBOARD
1 PC
2
BED FRAME
B
(DOES NOT INCLUDE
3
-
WITH THE PURCHASE)
4
5
6
STEP 2
5
3
HARDWARE PART LIST
DESCRIPTION
JCBB BOLT M6 x 60mm
JCBB BOLT M6 x 35mm
M6 FLAT WASHER
M6 SPRING WASHER
M6 HEX NUT
M4 ALLEN KEY (BALL SHAPE)
QTY
4 PCS
4 PCS
8 PCS
4 PCS
4 PCS
1 PC