- ページ 9
メディア・コンバーター Cypress CLUX-14CECのPDF 操作マニュアルをオンラインで閲覧またはダウンロードできます。Cypress CLUX-14CEC 12 ページ。 1x4 hdmi 1.3 splitter
Cypress CLUX-14CEC にも： 操作マニュアル (5 ページ), 操作マニュアル (6 ページ)
ページを印刷する
EDID and record/save it in the unit. If the display attached to the first
output source is DVI it will skip to next output until the first HDMI is
detected.
Sys. Reset switch: It is suggested to always turn this setting OFF, unless
⑦
performing a system reset. By turning it to on, the system will reset
all connected displays to HDMI input 1 once every 8~10 minutes. Factory
default is set as OFF.
Note:
The system reset switch only functions on displays with a built-in CEC
feature.
7.2 Rear Panel
HDMI IN
①
HDMI Input: This slot is where you connect the output port of your HDMI /
①
DVI source (i.e., DVD, set-top box) using a HDMI / HDMI to DVI adaptor
cable.
HDMI output 1/2/3/4: These slots connect from the splitter to the input
②
ports of the HDMI displays. If there's more than one output connected, all
HDMI outputs will display an identical image.
Power: This is the slot where you insert the 5V DC power supply for
③
electrical power from an AC outlet.
4
3
HDMI OUT
2
②
5
DC 5V
1
③