- ページ 7

コンピュータ・ハードウェア Cypress CMIR-44のPDF 操作マニュアルをオンラインで閲覧またはダウンロードできます。Cypress CMIR-44 12 ページ。 4 by 4 infrared matrix
Cypress CMIR-44 にも：操作マニュアル (12 ページ)

7. Hardware Description

The following sections describe the hardware components of the unit.

IR sensor: To control the system.

POWER Button & LED: Press to turn the unit on or again to put it into

②

standby. When the system is on the LED will be green, press again to enter

STANDBY mode, the LED will then be red.

IR IN 1 & output LED: Press the button to select which output IR signal will

③

be sent, the LED will then change according to the selection.

IR IN 2 & output LED: Press the button to select which output IR signal will

④

be sent, the LED will then change according to the selection.

IR IN 3 & output LED: Press the button to select which output IR signal will

⑤

be sent, the LED will then change according to the selection.

IR IN 4 & output LED: Press the button to select which output IR signal will

⑥

be sent, the LED will then change according to the selection.