- ページ 3

音楽ミキサー Ashly MX-406のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Ashly MX-406 12 ページ。 Stereo microphone/line mixer
Ashly MX-406 にも：取扱説明書 (12 ページ), テクニカルノートと仕様 (2 ページ), 取扱説明書 (12 ページ), 取扱説明書 (16 ページ)

ページを印刷する

The lightning flash with arrowhead

symbol, within an equilateral triangle, is

intended to alert the user to the presence

of uninsulated "dangerous voltage"

within the product's enclosure that may be

of sufficient magnitude to constitute a risk

of electric shock to persons.

1. INTRODUCTION

Congratulations on your purchase of an Ashly

MX-406 stereo mic/line mixer, a professional, studio qual-

ity solution to everday mixing needs. MX-406 features

include six channels of mic or line inputs with mic input

pad, TRS insert points, and +48V phantom power. Each

channel has up to 60dB input gain, separate treble and

bass controls, an aux send control, level, and a stereo pan

control. A stereo line input is provided for a stereo pro-

gram source such as tape, CD, or MP3 player. Outputs

include aux master, stereo line out (pre-master), stereo left

and right, transformer balanced mono out, and stereo head-

phones. A full 11 segment LED array indicates stereo

output level.

Stereo main outputs use 1/4" jacks, stereo line

input and line out use RCA connectors, and there is an

additional 3.5mm jack on the front panel for stereo line in.

A transformer isolated 600 ohm mono output uses an XLR

connector. Ashly mixers still use professional quality

16mm metal shaft potentiometers for greater accuracy and

long life and of course, Ashly products come with a worry-

free five year warranty.

2. UNPACKING

As a part of our system of quality control, every

Ashly product is carefully inspected before leaving the

factory to ensure flawless appearance. After unpacking,

please inspect for any physical damage. Save the ship-

Operating Manual - MX-406 Stereo Microphone/Line Mixer

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT RE-

MOVE COVER. NO USER SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

TO REDUCE THE RISK OF FIRE OR ELECTRICAL SHOCK,

DO NOT EXPOSE THIS APPlIANCE TO RAIN OR MOISTURE.

WARNING:

THIS APPARATUS MUST BE EARTHED

The exclamation point within an eqilateral

triangle is intended to alert the user to the

presence of important operating and

maintenance instructions in the literature

accompanying the device.

ping carton and all packing materials , as they were care-

fully designed to reduce to minimum the possibility of

transportation damage should the unit again require pack-

ing and shipping. In the event that damage has occurred,

immediately notify your dealer so that a written claim to

cover the damages can be initiated.

The right to any claim against a public carrier

can be forfeited if the carrier is not notified promptly and

if the shipping carton and packing materials are not avail-

able for inspection by the carrier. Save all packing mate-

rials until the claim has been settled.

3. AC POWER REQUIREMENTS

The MX-406 mixer will perform normally from

100 to 240 volts AC, 50-60Hz. Use only properly

grounded AC receptacles. To reduce the risk of ground

loop hum, use a central point for system AC power distri-

bution. Power consumption is less than 30 watts.