- ページ 10

IP電話 Cypress Communications 1120のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Cypress Communications 1120 18 ページ。 Professional-level desktop phone

Connecting the IP Phone to the LAN

Follow this procedure to connect the terminal to the Local Area Network (LAN) and to a

power source.

IP Phones can be powered by an AC adapter or over a LAN. Contact your installation

technician to identify the correct power option.

Warning: Risk of equipment damage

Do not plug the IP Phone 1120 into a regular telephone jack. This

causes severe damage to the terminal. Consult your system

administrator to ensure that you plug your telephone into a

10/100BaseT Ethernet jack.

Connecting the IP Phone to the LAN

1. Connect one end of the CAT-5 line cable to the LAN Ethernet port, identified with a

LAN icon, located on the back of the terminal.

2. Connect the other end of the CAT-5 line cable to the IP network jack. For a terminal

sharing LAN access with a PC, connect a second CAT-5 line cable to the PC Ethernet

port located on the back of the terminal, identified by the PC icon. Connect the other end

of the cable to the Ethernet port on the computer.

3. For a secure power connection, thread the cord around the strain relief, retaining hook,

and channel on the back of the terminal.

4. Secure the terminal footstand to the terminal base.

Prerequisites

IP Phone 1120 User Guide