- ページ 8
楽器 Ashton AURORA 1000のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Ashton AURORA 1000 16 ページ。
ページを印刷する
USER MANUAL
Setup
Power Supply
power Supply
1. Turn the [VOLUME] knob to the minimum level.
1.
Please turn the [VOLUME] knob to the minimum volume level.
2. Connect the AC adaptor to the DC IN jack.
2.
Connect the AC adaptor to the power supply jack.
3. Plug the AC adaptor into an AC outlet.
4. Press the POWER button, the LED display will light up,
3.
Plug the AC adaptor into an AC outlet.
indicating the piano has power.
4.
Press the POWER button, the LED display will lights up, that
[
]
5. To turn OFF the keyboard, press and hold the POWER
indicates the piano has power on.
button until all the LED displays are turned OFF.
Note:
5.
While the piano is power on, press and hold the POWER button
1. If the piano is in Idle Mode, the piano will shut down
until all the LEDs display are turned off, that indicates the piano has
automatically if nothing is pressed for 30 seconds.
power off.
2. When the keyboard is not in use, or during a
Notes:
thunderstorm, turn OFF the keyboard and disconnect
1.
In the IDLE mode, the piano will shut down automatically in 30
the power.
minutes later if you do not take any action on the piano.
2.
When the keyboard is not in use or during thunderstorm, please
disconnect the power for safety purpose.
Connecting a pair of Headphones
connectionS
Connecting a pair of Headphones
A standard pair of stereo headphones can be plugged in here for
headphone jack
A standard pair of stereo headphones can be plugged in here for
private practice or late-night playing.
private practice or late-night playing.
Jack1:
When a pair of headphones is plugged into Jack 1, the internal
For private playing or personal monitoring, plug a set of
stereo speaker system is automatically shut off . The sound can
Jack1 :
When a pair of headphones is plugged into Jack 1, the internal
stereo headphones into the rear panel PHONES jack.
be heard from headphones.
stereo speaker system is automatically shut off . The sound can
Jack2: When a pair of headphones is plugged into the Jack 2, the
Note:
be heard from headphones.
sound can be heard from headphones and speakers of the
Jack2: When a pair of headphones is plugged into the Jack 2, the
Never use headphones at a high volume or at an
instrument.
sound can be heard from headphones and speakers of the
uncomfortable level for an extended period of time as it may
instrument.
Note：
cause hearing damage.
Do not listen with the headphones at high volume for long periods of
Note ：
time. Doing so may cause hearing loss.
Do not listen with the headphones at high volume for long periods of
time. Doing so may cause hearing loss.
Connecting an Audio Equipment
amplifier
Connecting an
The rear-panel AUX.OUT jack delivers the output of the instrument for
Use the AUX OUT jack on the rear-panel to plug in an
connection to a keyboard amplifier, stereo sound system, a mixing
console, or tape recorder. Use an audio cord to plug into the AUX.OUT
The rear-panel AUX.OUT jack delivers the output of the instrument for
amplifier, stereo sound system, a mixing console or tape
jack located on the rear board then plug the other end of the cord into
connection to a keyboard amplifier, stereo sound system, a mixing
recorder.
AUX.IN of the amplifier.
console, or tape recorder. Use an audio cord to plug into the AUX.OUT
Note:
jack located on the rear board then plug the other end of the cord into
To avoid damaging the speakers, please ensure that the
Note:
AUX.IN of the amplifier.
volume has been set to the minimum level before connecting
To avoid damaging the speakers, please ensure that the volume has
other devices.
been set to the minimum level before connecting the power and other
Note:
devices.
To avoid damaging the speakers, please ensure that the volume has
been set to the minimum level before connecting the power and other
devices.
Connecting an MP3/CD Player
5
Connect the audio output of an MP3/CD player or other audio source
8
Connecting an MP3/CD Player
to the stereo AUX. IN jack on the rear panel.
The input signal is mixed with the piano signal, allowing you to play
along.
Connect the audio output of an MP3/CD player or other audio source
to the stereo AUX. IN jack on the rear panel.
aw_CDP6000_Manual_G03_120423
[
Audio Equipment
MIN
]
Connections
Connections
MAX
VOLUME
100
95
75
25
5
0