ページを印刷するBODyPACK TRANSMITTER SPECIFICATIONS
FUNCTIONS
1. Antenna
2. LCD display
3. Power
Hold to change power ON / OFF
4. POWER / IR indicator
Green: Active
Flashing Red: IR transmitting enabled
Solid Red: Low battery power
5. Mic in
6. Channel selection button
7. Audio volume adjust
Do not alter unless necessary
8. IR Port
Match the frequency between this product
and the receiver to match levels. Each product will
take one infrared port when multi-system
is in use.
a. Selecting a GROUP or ChANNEL
1. Hold the select button until GROUP and
CHANNEL display alternately on screen.
2. Release to press select button when
GROUP (a) is on display. This will enable
a change in frequency. When GROUP is
flashing, press select button to set the
frequency by one.
3. Release to press select button when
CHANNEL (b) is on display. This will enable
a change in frequency. When CHANNEL
is flashing, press select button to set the
frequency by one.
c. Battery Display
Indicates the current power level of the battery.
d. Frequency Display
Indicates the master frequency in use.
12