- ページ 13

歯科医療機器 ASI 2045のPDF 操作・サービスマニュアルをオンラインで閲覧またはダウンロードできます。ASI 2045 20 ページ。 Dental operative unit classic assistant’s cart

1044/1045/2044/2045

laSSic

dvanced

anual

2.4.3 Fiber Optics Operation

In order for fiber optics to work, the fiber optic handpiece must be attached to the

handpiece tubing. Once the handpiece has been removed from its holder, press the foot

control to activate the fiber optics.

The specific handpiece air pressure may need to be increased to create the back pressure,

depending on the type of fiber optic handpiece you are using. Please refer to Adjusting

Handpiece Pressure for more information.

Fig. 2.4.4-A

2.4.4 Install Swivel Coupler Onto Handpiece Connector

Tools Needed: Manufacturers handpiece/coupler wrench

Install Swivel Coupler:

1. Remove the quick connect coupler from the handpiece. (Fig. 2.4.4-A)

2. Insert coupler into handpiece connector, carefully align the coupler to handpiece

connector, making sure the rubber gasket touches. (Fig. 2.4.4-B)

Fig. 2.4.4-B

3. Firmly tighten the coupler into handpiece nut. Use manufacturers small flat wrench to

hold coupler while tightening if necessary.

4. Place handpiece onto the quick connect coupler and test for leaks by running the

handpiece. (Fig. 2.4.4-C)

Fig.2.4.4-C

Rev.A

ASI - The leader in Advanced Systems Integration www.asimedical.net