- ページ 3
アンプ Cyrus integrated 8 vs2のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Cyrus integrated 8 vs2 7 ページ。
ページを印刷する
User Instructions
Welcome to the world of Cyrus!
Congratulations on your choice of Cyrus Hi-fi products. Our state-of-the-art
design technology and outstanding quality of manufacture has won countless
awards around the world. We are confident that you will derive great pleasure
from owning a product from one of the most recognised and respected
manufacturers of hi-fi equipment.
Please read these instructions carefully before commencing installation. They
provide full guidance to help you install your integrated 6vs2/8vs2 safely and
correctly.
Preparations for Installation
Before installing the integrated 6vs2/8vs2 check that the following items are
included in the accessory box.
Warranty Card (with instruction manual)
Power Cable
Remote Handset
4 Loudspeaker Plugs (certain markets only)
After removing these items, please retain the packaging.
Install the integrated 6vs2/8vs2 in a well ventilated location away from
sources of high temperature, dust or humidity. Never stand the integrated
6vs2/8vs2 under another unit or on any surface likely to obstruct its cooling or
ventilation.
INSTALLATION
(Refer to Fig 1):
Key to the rear panel drawing:
1.
Right Speaker Output
2.
MC-BUS System Connection
3.
Pre-Amplifier Output
4.
Tape Recorder Output
5.
TAPE Input
6.
MP3 Input
7.
LINK Input
8.
AUX/PH Input
9.
AV Input
Connecting to the AC Mains Supply
Connect the socket on the AC Power cable to the Power inlet
of the integrated 6vs2/8vs2. Now connect the cable to a suitable AC power
point.
1&
The mains power switch
on the rear panel of the integrated 6vs2/8vs2
should be left on for normal operation, except when left unattended for a long
period when it should be switched off or disconnected from the AC supply.
Connecting Signal Inputs
Connect a phono cable between each component and the sockets as marked
on the rear panel. Ensure left and right channels are correctly connected. The
integrated 6vs2/8vs2 has inputs for CD Player – CD
i
Home Theatre decoder - AV
g
f
and MP3
which can be used to connect a wide variety of products.
Check the specification of these products before connecting to your integrated
6vs2/8vs2.
Connecting a Turntable
The integrated 6vs2/8vs2 is a line level amplifier. To play a turntable through
your unit an external phono pre-amplifier is required.
Connecting Tape/Disc recorders
To connect the tape recorder you will need two phono cables. Connect one
cable from the Output or Playback sockets of the tape deck to the TAPE Input
e
of the integrated 6vs2/8vs2 and a second cable from the Input or Record
sockets of the tape deck to the Tape Record Output - TP OUT
the integrated 6vs2/8vs2.
GB
GB
10. Tuner Input
11. CD Input
12. Left Speaker Output
13. PSX-R Connection*
14. Headphone socket
15. Power Inlet
16. Mains Fuse Holder
17. Power Switch
*integrated 8vs2 only
1%
on the rear panel
1!
, a tuner - TU
and three auxiliary inputs – AUX/PH
Cyrus integrated 6 vs2 & integrated 8 vs2
Connecting Headphones
The headphones socket
connection to a pair of headphones. Headphones may be permanently
connected to the amplifier and selected when required with the front panel
switch.
Connecting Loudspeakers
Fit plugs to the loudspeaker cables making sure to line up + and - at each
end. Most cables have polarity indicators and may also be marked for
directionality. The + and - terminals of the integrated 6vs2/8vs2 must be
connected to the corresponding + and - terminals of the loudspeakers.
Ensure that the connections are secure, then connect the left and right
loudspeakers to the rear panel sockets
NOTE: The dual output sockets of the integrated 6vs2/8vs2 are provided for
convenient connection of bi-wiring speaker cables.
MC-BUS System
Connecting the MC-BUS sockets
BUS system provides unified system control. An MC-BUS loop is established
by connecting single phono cables from the MC-BUS output of one unit to the
MC-BUS input of another in a daisy-chain. Complete the loop by returning the
MC-BUS output of the final component to the MC-BUS input of the first.
With MC-BUS established you can control the power function of the entire
system from the integrated 6vs2/8vs2, from the front panel or remote control.
Selecting 'CD' from the front panel will switch on the integrated 6vs2/8vs2, the
Cyrus power amplifier and a Cyrus CD player. When the integrated 6vs2/8vs2
is set to Standby, the entire system will also switch off.
When a Cyrus Surround Processor is in the MC-BUS loop, setting of the
volume calibration level will take place automatically when integrated
6vs2/8vs2's AV input is selected. Refer to the handbook for the Surround
Processor for further details.
External Power Supply - PSX-R
The PSX-R is a unique DC power supply which will upgrade the sonic
performance of your integrated 8vs2. When a integrated 8vs2 / PSX-R
combination is installed, analogue and signal related sections of the
integrated 8vs2 are powered from this clean, stable power source while other
requirements are supplied internally. This ensures complete isolation of
control circuits and sensitive analogue sections reducing AC mains-borne
noise and power supply ripple.
To connect the PSX-R to the Integrated 8vs2 plug the connector on the
umbilical cord of the PSX-R into the Multi-Pole socket on the rear of the
integrated 8vs2 (
1)
, a
h
, LINK
d
sockets of
t
is a standard 6.35mm (¼") stereo jack socket for
a
1@
and
(Refer to figs 1 & 6)
b
of the integrated 6vs2/8vs2 in an MC-
(integrated 8 vs2 only)
1#
Fig.1) You will need a mains supply for both units.
of the integrated 6vs2/8vs2.
3