- ページ 6
アンプ Cyrus Mono X 200 SignatureのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Cyrus Mono X 200 Signature 12 ページ。 Power amplifier
ページを印刷する
Cyrus Mono X 200 Signature & Mono X 300 Signature
Chain Output
The Chain output f allows more than one Mono X Signature to be
connected to each channel of a pre-Amplifier or decoder.
Note: The Chain output is operational whether phono (RCA) or Balanced
XLR input connection is made to the Mono X Signature.
Bi-Amplification
If your pre-amplifier only has a single set of pre outputs, the Chain facility
can be used to connect additional Mono X Signature amplifiers to each
channel for Bi/Tri-amping. Such a bi-amplified system provides the sonic
benefits of totally separate power amplification for the bass and treble
units of the loudspeakers.
In the bi-amplified system illustration below, a preamplifier is connected
to four Mono X Signature amplifiers - two for the left channel and two for
the right channel. Phono input connections are shown.
OUT
IN
MC-
PRE OUT 1 PRE OUT 2
BUS
MADE IN ENGLAND
SPEAKER
INPUT
RS232
SPEAKER
INPUT
RS232
Right
treble
-
+
-
+
Right
bass
Note: The Chain output is operational whether phono (RCA) or Balanced
XLR input connection is made to the Mono X Signature.
ZONE 2
IN-6
IN-5
IN-4
IN-3
IN-2
IN-1
OUT
USE PSX-R ONLY
HEADPHONE
IN-7
IN-8
IN-9
IN-10
IN-11
CHAIN
OUTPUT
SPEAKER
MC-BUS
INPUT
INPUT
INPUT
RS232
MADE IN ENGLAND
CHAIN
OUTPUT
SPEAKER
MC-BUS
INPUT
INPUT
INPUT
RS232
MADE IN ENGLAND
Left
treble
-
+
-
+
Left
bass
Gain Matching
All Cyrus power amplifiers, and all power amplifier stages in Cyrus
integrated amplifiers have the same voltage gain characteristics. This
means that you can use the Mono X Signature in conjunction with any
Cyrus amplifier for bi-amping, etc. without any set-up adjustments being
required.
CHAIN
OUTPUT
MC-BUS
INPUT
INPUT
MADE IN ENGLAND
CHAIN
OUTPUT
MC-BUS
INPUT
INPUT
MADE IN ENGLAND
4
User Instructions