- ページ 4

産業機器 cytiva AxiChrom 200のPDF 開梱取扱説明書をオンラインで閲覧またはダウンロードできます。cytiva AxiChrom 200 6 ページ。

Step

Note:

Action

Unscrew all the screws on the outer edges of the front panel and remove the

front panel. The front panel is marked FRONT.

Dismount the ramp from the front panel by unscrewing the inner screws on

the panel.

Remove all the wooden cross-struts inside the crate holding the column and

the pivot stand in place by unscrewing the screws.

Remove the accessory box.

Place the ramp on the floor close to the wooden pallet. Carefully transport the

pivot stand with the column down the ramp.

Note:

Hold the ramp in place with your foot in the beginning. Remove your foot

before the column starts moving down the ramp, to avoid injury.

Unscrew the screws on the two adapter holders. Carefully remove the

adapter.

Carefully remove the components of the column from the protective

packaging.

Place the components in a safe place.

Locate the packing list. Check the components against the list. If any

component is missing, contact your Cytiva representative.

Inspect all components for signs of damage. If any component is damaged,

contact your Cytiva representative.

WARNING

The Operating Instructions contain important safety information.

All users must read the entire Operating Instructions before

installing, using, or maintaining the system. Always keep the

Operating Instructions at hand when using the column.

Tools, Product documentation binder, and Operating Instructions are located

in the accessory box.

AxiChrom 140 and 200 Unpacking Instructions 28943208 AC