- ページ 17

おもちゃ EG Aircraft MX2 50CC Giant Scale Aerobatic AircraftのPDF マニュアルをオンラインで閲覧またはダウンロードできます。EG Aircraft MX2 50CC Giant Scale Aerobatic Aircraft 19 ページ。

F INAL RADIO SYSTEM INSTALLATION:

U U

1. Whether you 72 MHz systems or the newer 2.4 GHz systems, proper radio installation and care is vital

to the safe and reliable operation of your aircraft. Follow the manufacturer's instruction for installation

guidance of receivers and batteries paying attention to factors such as vibration isolation, adequate

cooling, and clearances.

2. Mount your reciever(s) securely in a location which provides a clean and maintenance free solution to

your setup. All servo wires should be neatly routed and secured in place so they will not come loose or

flop around during flight.

3. The fuselage ply sides provide space to mount your switches just below the canopy. Mount your

switches according to the manufacturer's instructions and route your wires safely and securely as above.

4. Your receiver battery(s) can be mounted in a variety of locations depending on your balance needs.

Regardless of where you mount your batteries it is vital that they are very secure with no possibity of

coming loose. Use double sided Velcro to hold the batteries from sliding around and then use zip ties or

Velcro straps to secure them tightly in place.

5. Servo and battery leads are the life blood of your aircraft. Make sure all wires are top quality and

connectors are tight and display no loose pins or frayed wires. Servo clips are provided in the kit for your

convenience. These servo clips can even be glued to the wood structure using CA if desired.

6. Check all radio programming and control surface operations thoroughly before your initial flight.

Check your radio range according to the radio manufacturer's instructions both with the engine off and

running.

B ALANCING and PRE-FLIGHT:

U U