- ページ 16

セキュリティセンサー Cytronix LSS05のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Cytronix LSS05 17 ページ。 Auto-calibrating line sensor

The usage of the calibration signal pin is optional. The pin (TTL, 5V) can be connected to a

microcontroller if user want to use it. The Calibration signal pin has the same functions as the

Cal button. Instead of manually pushing the Cal button for the settings of LSS05, user can

use a microcontroller to pull down the signal to get into the settings. It is similar to the Cal

button, pulling down signal pin once set the sensor bar into calibration mode, pulling down

the signal pin twice consecutively to set the sensor into dark line mode and pulling down the

signal pin 3 times consecutively set the sensor into bright line mode. The timing requirement

for the consecutive signals is 1.5 seconds (refer to the timing diagram).

Pin 8 which is Cal signal pin is connected to push button. Then the push button is connect to

microcontroller through a transistor.

Reminder: Please keep the Cal. signal at high logic level 5V if it's not generating pulse

for the function of the signal.

ROBOT . HEAD to TOE

Product User's Manual – LSS05