ページを印刷するASSEMBLY
Rear Wheel
(required tools: 18mm wrench, recommended torque 40 N.m)
Ensure the rear wheel is tightened at the recommended torque value.
Tire pressure
Inflate the tires to (35 PSI). Recommended tire pressure is indicated on the tire sidewall.
Do not over-Inflate or under-Inflate tires.
Fender
(Required tools: 5mm hex key, 15mm wrench)
1. Insert the fender hook into the fork arch.
2. Insert the bolt into the fender hook and tighten on the fork arch.
3. Use the bolts mounted on the fork to tighten the fender stays.
Bottle Holder
Use the screws provided to Assemble the bottle holder.
Hydraulic Brake Lever Adjustment
1. Tighten the indicated bolt to extend the brake lever reach.
2. Loosen the indicated bolt to shorten the brake lever reach."
(required tools: 2mm hex key)
8
U S E R M A N U A L