- ページ 3

ヘッドセット BlueRider DT-BSH-02のPDF マニュアルをオンラインで閲覧またはダウンロードできます。BlueRider DT-BSH-02 5 ページ。 Bluetooth stereo headset

ページを印刷する

Exceptional pairing： Pairing to another device of BSH-02 product, it is to

available to become a speaker unit after connection completed. If the machine is

under NOT powered on State, please holding key "A" no-drop about 10 seconds,

at this point to the parade will first represents the reboot, enter general pairing

mode, still do not let go, when the lights indicated that the red light and green light,

Twinkle, Twinkle State (intersection interval time shorter), means to enter

exceptional pairing mode

(C)

Pairing Bluetooth products：

1. Please be paired Bluetooth devices are placed at and away next to the device

which was with blue tooth function on (some brands of mobile phones will search

all open Bluetooth devices, after the completion of all search, to complete a

pairing, time will be better than long, please wait and be patience )

2. Will this product is holding with key "A" no-drop, until the product after entering

general pairing mode, at this point lights should be green, red light flashing (slow

flashing)

3. Begin to search for Bluetooth products, and it will be found (

encounter when you need to be paired codes, please enter numbers " 0000 "

4. When products lights by a two-color back to green lights, means the pairing is

complete, you can make use of this product online

5. After pairing is completed, press key "C "can be connected or disconnected for

communication, Key "A" , and Key "B" are be as increase and decreased the

volume function

6. Wake-up function：

When you are finished pairing process, two pairing Bluetooth devices in the

distance of more than 10 meters coverage will be automatically disconnected.

When you want to connect to Bluetooth function again, please long press key "B",

you will hear the sound of " beeping " , and the point lights to be green lights flash,

means the function be wake up, and mobile phones and Bluetooth will be begin to

connect again.(some brands phone may not support wake-up features, please

refer to the mobile phone specification to confirm that supported Bluetooth

wake-up function).

(D)

To pairing with another product of

( inter-communication function)

1. Internal speaker function is created by our company DIMTON technology, like small

intercom, facilitate dialogue. It will not be need to through another Bluetooth

receive or launching device, you only need two Bluetooth headset, and fully

compatible to BSH-01.

2. Take 2-supported Bluetooth headset placed within 1-meter, and identify 2 sticks

Bluetooth headphones all during the shutdown state

3. Select one headset holding key " A " about 10 seconds, will first powered on, enter

general pairing mode, and then enter the special pairing mode (internal intercom

pairing), at this point lights will first powered on green lights are turned into the dual

/ Exceptional pairing

DT-BSH-02

) product, to

DT-BSH-02