- ページ 8
電動工具 EGAmaster 79993のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。EGAmaster 79993 18 ページ。 Torque wrenches
ページを印刷する
1. The wrench is reversible, allowing tightening in both directions, but is only calibrated for
clockwise tightening.
2. Examine wrench for cracks, scratches, rust, or other damages. These can cause wrench
failure and operator injury.
3. Any defect found in insulating layer of wrench, NO LIVING WORK allowed, please send
wrench to do performance check or maintenance.
4. Do not drop the wrench when working at a high position, drop will damage the wrench, and
result in inaccuracy.
5. Make sure the ratchet in the correct position.
6. Never extend the handle length, it will cause inaccuracy of wrench.
7. Make sure the wrench is operated by qualified staff.
8. Do use with an insulated glove when operating.
8
1. To unlock pull the lock collar toward the hand grip section and hold
in position while turning the grip.
2. Turn the grip to righ until reach the torque setting.
Example: setting 16NM.
3. Turn the grip to the right until zero aligns with the scale centerline
and the end of the grip aligns with the 15 torque setting.
4. Continue to turn the grip to the right until 1.0 aligns with the scale
centerline.
5. Release the lock collar and turn the grip slightly left or right until
the lock collar springs forward into the lock position to ensure exact
alignment is achieved.
WARNINGS