- ページ 6
エア・ハンドラー Blueridge BM18MFCCのPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Blueridge BM18MFCC 16 ページ。 Wall ceiling air handler
ページを印刷するIndoor Unit Installation
Indoor Unit Installation Instructions
NOTE: Panel installation should be performed
after piping and wiring have been completed.
Step 1: Select installation location
The BM18MFCC can be installed vertically on a
low wall or horizontally on the ceiling. Your
chosen location should meet these conditions:
Enough room for installation and maintenance.
Enough room for the connecting pipe and
drainpipe.
The ceiling is horizontal and its structure can
sustain the weight of the indoor unit.
The air inlet and outlet are not impeded.
The airflow can fill the entire room.
There is no direct radiation from heaters.
Safety Precautions
WARNING
•
Securely install the indoor unit on a
structure that can sustain its weight. If
the structure is too weak, the unit may
fall and cause personal injury, unit and
property damage, or death.
•
DO NOT install the indoor unit in a
bathroom or laundry room as excessive
moisture can short the unit and corrode
the wiring.
Page 6
CAUTION
DO NOT install the unit in the following
locations:
Areas with oil drilling or fracking
Coastal areas with high salt content in the
air
Areas with caustic gases in the air, such as
near hot springs
Areas with power fluctuations, such as
factories
Enclosed spaces, such as cabinets
Areas with strong electromagnetic waves
Areas that store flammable materials or gas
Rooms with high humidity, such as
bathrooms or laundry rooms
CAUTION
•
Install the indoor and outdoor units,
cables and wires at least 3 feet from
televisions or radios to prevent static
or image distortion. Depending on the
appliances, a 3 foot distance may not be
sufficient.
•
If the indoor unit is installed on metal, it
must be electrically grounded.
4
Revised 5/14/2020