- ページ 10

屋外暖炉 AMBERCOVE A302016300のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。AMBERCOVE A302016300 18 ページ。 Slate square lp firepit

If you have opened the carton and removed all packages,please disregard and SEP 1

STEP1.

(1)Open the carton and turn it upside down,make

sure the 4 pieces of carton open us as .

(2)Lift of the carton carefully and be wary of

accessories inside falling away.

(3)Take all the packing materials away except for

the paper honeycomb board

rounding top of the fireplace.

STEP 3.

(1). Check each part before use the product.

Make sure the the control knob is turned "OFF" before

assembling,see Figure A.

(2).Put gas tank in the metal tank seat.see Figure B.

(3)Connet the Pressure-Regulating valve to the gas tank .see Figure

(4).Turn the cylinder valve clockwise to the gas supply on the gas

tank.see Figure C.

(5).Screw regulator Coupling clockwise by hand only. Make sure it is

fastened.

(6).Make sure the tank sits on the metal seat completely.Turn the

wing screw on the out part of metal seat clockwise to secure the tank

tightly.see Figure D.

(7).Locate the battery,remove the plastic cover the first .Unscrew the

rubber cap of the Electric ignitor ,place a AA battery into battery

case . Make sure the positive pole ("+") towards the cap. Screw the

cap back to the battery case tightly.see Figure E.

(8).Take out the lid,Place lava rock or fireglass averagely on the top

of firebowl.see Figure F.

DO NOT COVER THE IGNITION SCREEN.

When place the lava rock or fireglass into the firebowl,Alaways keep

ignition SCREEN visible.

INSTRUCITONS

Please keep these owner's manual for future reference.

and 2.see the STEP 3 directly.

STEP2.

(1)Turn the fireplace heads up on a flat

ground.

(2)Removed all the paper honeycomb board

rounding top of the fireplace.