- ページ 14

食器洗い機 Asko D1996FIのPDF プランニング・デザイン・マニュアルをオンラインで閲覧またはダウンロードできます。Asko D1996FI 15 ページ。 User manual use & care guide general fr (french version)
Asko D1996FI にも：取扱説明書 (12 ページ), インストールとカスタマイズ (4 ページ), プランニング・デザイン・マニュアル (19 ページ), 取扱説明書 (12 ページ), 取付説明書 (14 ページ), (スペイン語) 操作とケア (12 ページ), (フランス語) 使用と保守のマニュアル (12 ページ)

FILL STRIPS INSTALLATION INSTRUCTIONS

Attaching Side Fill Strips

1. If you are installing the dishwasher with the side fill strips, you must remove the

insulation strips. These are the black sponge strips attached to the front edge of the

tank, from top to bottom. To remove them, simply grip the top or bottom edge and pull

it away from the tank, as illustrated in Figure 6.

2. The trim strip has multiple mounting holes. Align the largest hole with the same size

hole on the side of the dishwasher, as illustrated in Figure 7. (This hole is used when

you anchor the dishwasher to the cabinet.)

3. Keeping the trim strip aligned with the holes, open the dishwasher door and secure it

to the dishwasher with the screws provided, as illustrated in Figure 8. (The screw head

should be inside the tank.)

4. When anchoring the dishwasher to the cabinet, height adjustments is essential to

properly align the panel with the cabinet facings.

NOTES:

Be sure to order a side fill strip for each side (left and right).

The unit will accept various sized panels. Refer to the dishwasher specifications before

building the panel so it will correctly align with the cabinet facings.

If a four-inch toe kick is used, the unit must be installed at its lowest height. (The

dishwasher is delivered at its lowest height.) On four-inch toe kick installations, the

one-piece door panel will extend past the top of the control panel approximately 1-3/4".

Specifications are subject to change without notice. See installation instructions for additional details.

ASKO D

ISHWASHER

Figure 6.

Figure 7.

Figure 8.